-
Drill Chuck Key, 4way
4Way chuck key has 4 common sizes on it to replace your broken/lost key. No. 1 - 3 / 8" chuck - 17 / 64" pilot No. 2 - 3 / 8" chuck - 7 / 32" pilot No. 3 - ¼" chuck - 3 / 36" pilot No. 4 - ½" chuck - 9 / 32" pilot
$9.00 -
Sold Out
Automatic Centre Punch
Automatic Centre Punch. Use to mark your holes before drilling to ensure your drill bit doesn't move.Specificstions:Length: 130mmDiameter: 13mm
$14.00 -
105Degree Angled Drill For Bitsets
105Degree Angled Drill For Bitsets. Undo fasteners which are hard to get to, Useful for automotive work and general diy work. Input: 1/4" Hex Output: 1/4" Hex Angle: 105Degree Angle
$11.50 -
Sold Out
Diamond Burr Set - 30 Piece
30 piece diamond burr set with 3mm shank & 150 diamond grit. Great for craft, modelling and repair & can be used on ceramics, tiles, brick, glass, plastics, fibreglass, steel and wood. Comes in plastic storage case with clear window.
$16.00 -
25 Hole Metric Drill Gauge
25 Hole metric drill hole gauge. Conveniently check the size of drill bits and bolts. sizes go up in 0.5mm increments. Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5, 13mm
$16.00 -
TOLSEN 5Piece Screw Extractor Set
Tolsen 5 Piece Screw Extractor Set. Removes broken screws or bolts without damaging hole threads.Screw Extractor Sizes:Bolt size: 3-6mm (1/8"-1/4"), Drill size: 2mm6-8mm (1/4"-5/16"), Drill size: 3mm8-11mm (5/16"-7/16"), Drill size: 4mm11-14mm...
$15.00 -
1/4, 3/8 & 1/2 Drive Socket Adapter for Drill
3 Piece 1/4, 3/8 & 1/2 Drive Socket Adapter set. Ideal for attaching sockets to your impact driver or drill. Length: 50mmSizes: 1/4", 3/8", 1/2" Adaptors
$10.00 -
Sold Out
120 Pieces Drum Sander Set
120 Piece - Drum Sander Set. Includes 1/4, 3/8 & 1/2 Sizes in 120grit Mandrel Sizes: 1/4, 3/8, 1/2 (4 of each size) 1/4 Sanding drums: 40pieces 120grit 3/8 Sanding drums: 40pieces 120grit 1/2 Sanding drums: 40pieces 120grit
$25.00 -
Sold Out
1/4 Flexible Shaft Screwdriver Bit Extension
1/4 Flexible shaft screwdriver bit extension. Great for getting around corners & into hard to reach places. Length: 29.5cm Colour: Black Material: Plastic & Metal
$10.00 -
1-15mm Bore Gauge, Metric & Imperial
1-15mm Bore Gauge with Metric & Imperial measurements. Ideal for quick and easy measuring of internal holes.Specifications:Length: 150mmMaterial: Stainless steelMetric measurement range: 1-15mm, 0.1mm GraduationsImperial measurement range:...
$15.00 -
3piece, 5flute Counter sink drills for wood
3piece, 5flute Counter sink drills for wood. 3 different sizes, great for counter sinking holes in wood and plastics. Sizes: 12mm, 16mm, 19mm Shank size: 1/4" Chamfer angle: 90degrees
$12.00 -
Mini Hand Drill
Mini Hand Drill for precise drilling with small drill bits. Takes drill bits with a 1mm shank or smaller. Drill turns by pushing handle down the spiral shaft. Drill Size: Approx 1mm and smallerLength: 100mm
$11.50 -
Hilka - 3piece Socket Driver Set
Hilka - 3piece Socket Driver Set. Made from high quality alloy steel great for attaching sockets to your impact driver or drill. Sizes: 1/4", 3/8", 1/2" Adaptors
$13.50 -
5 Piece Rasp Drill Set
5 Piece set of rotary rasp drill set. Ideal for carving wood, plastics and soft materials. Includes 5 different head types. Specification: Shank: 6mm(Approx.)Length: 55mm(Approx.)Diameter of head: 10mm(Approx.)
$12.00 -
150mm Magnetic 1/4inch Bit Holder
150mm Magnetic 1/4" Bit Holder. Makes getting screws in hard to reach places easy.
$8.00 -
On Sale!
TOLSEN 6Piece Spade Drill Bit Set 10,12,16,18,20,25mm
TOLSEN 6Piece Spade Drill Bit Set for drilling into wood. Drill bits have a 1/4" quick release shank and are 152mm long. Each drill bit is made from carbon steel which has been hardened and tempered.Set includes:1x 10mm Spade drill bit1x 12mm Spade drill...
Was: $16.50Now: $12.70 -
80 Grit, Flap Wheel Sander
80 Grit, Flap Wheel Sander. Ideal for sanding on woods, plastic and metal aswell as deburring after cutting material. Always wear safety glasses and PPE gear during use.Specifications:Grit: 80gritWheel diameter: Approx 50mmWheel height: Approx 24mmShaft...
$6.50 -
Sold Out
3piece Step Cone Drill Set
3piece Step Cone Drill Set with storage bag. Features high speed steel and 1/4inch quick change shank. These can also be useful for deburring holes. Sizes: Step drill 1: 3mm-12mm (3, 4, 5, 6, 7, 8, 9, 10, 11, 12 mm) Step drill 2: 4-12mm (4, 6, 8,...
$25.00 -
1/4inch Keyless Chuck
1/4inch Keyless Chuck for attaching to drills and impact drivers. Accepts drill bits up to 6mm.Specifications:Shank size: 1/4inch HexMax drill capacity: 6mmChuck length: 63.5mmChuck width: 25.8mm
$18.00 -
TOLSEN 10Piece Double End PH2 Screwdriver Bits Set
TOLSEN 10Piece Double End PH2 Screwdriver Bits Set 10 pack of PH2 double ended screw driver bits made from S2 industrial steel which has been hardened and tempered. Finished with satin finish and anti-slip surface. Great bulk set of PH2 bits for around...
$12.00