-
Sold Out
Engineering Measuring Square, 100 mm Blade
Engineer's square manufactured with solid steel with 100mm Hardened steel blade. Great for the smaller engineering projects or for carrying in your pocket for quick reference.
$16.00 -
Magnetic Welding Holders - 4-Piece Kit
Magnetic Welding Holders - 4-Piece KitCan be used to hold metal pieces in place while designing and welding. Magnet Strength: 9 lbs Dimensions: 60x50x55mm Approximately Can be used for 45, 90 or 135degree angles
$17.50 -
12Piece Cable Access Rod Kit - 3.3metres
12 piece non-conductive fiberglass cable access kit. Makes gaining access to cables under floorboards, ceiling ducts, trunking and wall cavities easy. Extended length: 3.3mIncludes:10x 330mm fiberglass rods1x flexible connection1x brass hook end for...
$29.00 -
Sold Out
FORCEPS BUNDLE - 1x bent & 1x Straight Forceps
FORCEPS BUNDLE - 1x bent & 1x Straight Forceps 6" Bent Forceps & 6" Straight Forceps for a variety of useful applications. Example: needle nose pliers, as a clamp, heat sink, vice, etc Material: Stainless Steel Length: 150mm/6inch Jaw...
$26.50 -
Sold Out
Magnetic Bench Vise Grooved Soft Jaws
Magnetic Bench Vise Grooved Soft Jaws. Ideal for Protecting your work from damage while clamping. Specifications:Length: 116mmThickness: 15mm eachColour: Green
$21.50 -
Eye Loupe Magnifier 10X
Eye Loupe Magnifier 10X, Can be used for inspecting small parts. Specifications:Strength: 10XColour: Black
$13.50 -
50mm Telescopic Inspection Mirror
50mm Telescopic Inspection Mirror with movable head. Great for inspecting hard to reach areas. Mirror diameter: 50mm Extended length: 610mm Collapsed length: 130mm
$7.00 -
40Piece Metric Tap and Die Set
40Piece Metric Tap and Die Set. Made from heat treated alloy steel and supplied in metal case. Includes: Tap & Die Sizes: 3x0.5, 3x0.6, 4x0.7, 4x0.75, 5x0.8, 5x0.9, 6x1.0, 6x0.75, 7x1.0, 7x0.75, 8x1.25, 8x1.0, 10x1.25, 10x1.5, 12x1.75, 12x1.5...
$73.00 -
Sold Out
Magnetic Bench Vise Flat Soft Jaws
Magnetic Bench Vise Flat Soft Jaws. Protect your work from damage while clamping. Length: 116mmThickness: 15mm eachColour: Orange
$21.50 -
Scriber Pick Set - 6 Pieces
Scriber Pick Set - 6 Pieces Double ended stainless steel with very fine tips. Great for electronics repair and small seal picks.
$15.50 -
Forceps, 6inch Straight
6" Straight Forceps for a variety of useful applications. Example: needle nose pliers, as a clamp, heat sink, vice, etc Material: Stainless Steel Length: 150mm/6inch Jaw Type: Straight Nose, Serrated Jaws
$15.00 -
Drill Chuck Key, 4way
4Way chuck key has 4 common sizes on it to replace your broken/lost key. No. 1 - 3 / 8" chuck - 17 / 64" pilot No. 2 - 3 / 8" chuck - 7 / 32" pilot No. 3 - ¼" chuck - 3 / 36" pilot No. 4 - ½" chuck - 9 / 32" pilot
$9.00 -
Large 16lb - Magnetic Pick Up Tool
Large 16lb - Magnetic Pick Up ToolGreat for picking up dropped screws from hard to reach places.Length: 187mm to 760mmStrength: 16lbsMaterial: Stainless SteelColour: Black
$12.00 -
Sold Out
2Piece Strap Wrench Set
2Piece Strap Wrench Set. Includes two wrenches 4" and 6". Used for tightning and loosening round objects and oil filters. Features: Cushion grip handles 4" Wrench for sizes upto 100mm 6" Wrench for sizes upto 150mm
$24.00 -
Forceps, 6inch Bent
6" Bent Forceps for a variety of useful applications. Example: needle nose pliers, as a clamp, heat sink, vice, etc Material: Stainless Steel Length: 150mm/6inch Jaw Type: Bent Nose, Serrated Jaws
$15.00 -
Sold Out
Automatic Centre Punch
Automatic Centre Punch. Use to mark your holes before drilling to ensure your drill bit doesn't move.Specificstions:Length: 130mmDiameter: 13mm
$14.00 -
Magnetic Welding Holder Clamp
Magnetic Welding Holder ClampCan be used to hold metal pieces in place while designing and welding. Magnet Strength: 9 lbs Dimensions: 60x50x55mm Approximately Can be used for 45, 90 or 135degree angles Note: Also available in a 4pack of clamps
$4.50 -
Sold Out
4pcs Auto trim removal tools
4pcs Auto trim removal tools . Includes 4 double ended automotive trim removal tools made from ABS plastic.
$9.50 -
105Degree Angled Drill For Bitsets
105Degree Angled Drill For Bitsets. Undo fasteners which are hard to get to, Useful for automotive work and general diy work. Input: 1/4" Hex Output: 1/4" Hex Angle: 105Degree Angle
$11.50 -
Clamp Tool with Magnifier
Clamp Tool with Magnifier. Great for soldering, Electronics Repair or just general small work. simply clamp your work piece using the 2 alligator clips and postion the magnifying glass to easily see what you are working on.
$16.00
Tools
All types of hand tools for all types of projects and jobs. High quality and affordable.